Used SHACMAN F3000 6×4 Dump Truck 380HP

The Used SHACMAN F3000 6×4 Dump Truck is built for demanding material transport where strength, traction, and carrying capacity matter. Equipped with a 380 HP Weichai WP12.380E32 diesel engine, a Fast Gear transmission, heavy-duty axles, and a reinforced dump body, this truck is suitable for mining, quarrying, road construction, earthmoving, and infrastructure projects.

The vehicle shown in the photos uses the well-known F3000 cab and a 6×4 drivetrain. In addition, its large steel cargo body provides the space needed for bulk materials such as sand, gravel, soil, stone, ore, and demolition material.

For companies that need heavy transport capacity without purchasing a new truck, this used SHACMAN dump truck offers a practical option for fleet expansion and project-based equipment purchasing.

Heavy-Duty 6×4 Drivetrain

The 6×4 layout gives the truck two driven rear axles. Therefore, it can provide strong traction when operating with heavy loads or on uneven roads.

This configuration is especially useful on construction sites and quarry roads, where surfaces may be loose, muddy, or rough. At the same time, the three-axle design helps distribute the load across the chassis.

The truck uses a 9.5-ton front axle and a 16-ton rear axle specification, supporting demanding transport work.

380 HP Weichai Diesel Engine

Power comes from a Weichai WP12.380E32 six-cylinder diesel engine rated at up to 380 HP.

The WP12 engine platform is designed for heavy commercial vehicle applications. Its power output makes this truck suitable for loaded starts, climbing, site transportation, and longer hauling cycles.

Moreover, the diesel powertrain is paired with a Fast Gear 9JSD180 transmission. This combination provides multiple gear choices so the driver can match vehicle speed and engine load to different road conditions.

Technical Specifications

Specifications refer to this listed configuration. Used vehicle specifications and equipment condition should be confirmed before shipment.

Large Reinforced Dump Body

The truck is equipped with a large steel dump body measuring approximately 5.8 × 2.3 × 1.5 meters.

Its high side walls allow the vehicle to carry bulk construction materials efficiently. Meanwhile, the reinforced body structure helps handle repeated loading and unloading cycles.

Typical materials include:

• Sand and gravel
• Soil and clay
• Crushed stone
• Coal
• Ore
• Construction waste
• Quarry materials

The hydraulic tipping structure also allows the cargo body to be raised for faster unloading. As a result, the truck can reduce unloading time during repeated transport cycles.

Strong Chassis and Axle Configuration

Heavy loads place significant stress on the chassis, suspension, and axles. For this reason, the F3000 platform uses a heavy-duty frame and commercial truck axle system.

The 16-ton rear axle configuration is particularly important for loaded operation. In addition, the large 12R22.5 tires provide a stable contact area for heavy-duty road and site use.

This setup makes the truck suitable for buyers who need a used tipper for demanding industrial transport rather than light urban delivery.

Practical Medium-Long Flat Roof Cab

The truck uses a medium-long flat roof cab, which provides a practical working space for the driver.

The large windshield improves forward visibility. Meanwhile, wide side mirrors help the driver observe surrounding vehicles and work areas.

The cab also uses a conventional manual control layout. Therefore, drivers familiar with heavy-duty trucks can quickly adapt to the vehicle.

For construction companies and fleet operators, a simple cab layout can also make daily inspection and routine operation easier.

Applications

This used SHACMAN F3000 6×4 tipper can serve several heavy-duty industries.

Mining and Quarry Transport

The strong drivetrain and dump body make it suitable for moving stone, ore, coal, and other bulk materials between loading areas and processing points.

Construction Projects

The truck can transport sand, gravel, soil, and building materials for residential, commercial, and industrial construction.

Road and Infrastructure Work

It can support highway construction, roadbed preparation, bridge projects, utility work, and large earthmoving operations.

Bulk Material Transport

For fleet operators, the vehicle can also be used for short- and medium-distance transport of loose industrial materials.

Why Choose a Used SHACMAN F3000 Dump Truck?

A used F3000 can help contractors add hauling capacity while controlling equipment investment.

More importantly, the 380 HP engine and 6×4 drivetrain make this configuration suitable for demanding transport tasks. The Fast Gear manual transmission also provides a familiar drivetrain layout for commercial truck operators.

For overseas buyers, this type of vehicle is well suited to construction fleets, mining contractors, equipment rental companies, truck dealers, and infrastructure contractors.

Used Truck Inspection Points

Before purchasing a used dump truck, buyers should confirm the actual condition of the engine, transmission, hydraulic lifting system, chassis, axles, tires, brakes, and cargo box.

It is also important to check engine hours or mileage when available. In addition, buyers should confirm the production year, VIN or chassis number, engine number, tire condition, and export documentation before shipment.

For bulk orders, individual vehicle condition may differ, so each unit should be confirmed separately.

FAQ

What model is the truck shown in the pictures?

It is a SHACMAN F3000 6×4 used dump truck.

What engine does this truck use?

This configuration uses a Weichai WP12.380E32 six-cylinder diesel engine with a maximum output of 380 HP.

What transmission is installed?

The truck uses a Fast Gear 9JSD180 manual gearbox.

How many tires does the truck have?

The vehicle has 10 tires with a 12R22.5 specification.

What is the cargo box size?

The dump body measures approximately 5.8 × 2.3 × 1.5 meters.

What is the overall truck size?

The listed overall dimensions are approximately 8.8 × 2.5 × 3.3 meters.

Is this truck suitable for mining work?

Yes. Its 6×4 drivetrain, 380 HP engine, heavy-duty axles, and large dump body make it suitable for quarry, mining, and bulk material transportation.

Can it be used for construction projects?

Yes. It can transport soil, sand, gravel, crushed stone, and other construction materials.

Is the truck Euro III?

According to the supplied specification sheet, this configuration meets the Euro III emission standard.

Should the exact condition be checked before ordering?

Yes. Since this is a used vehicle, the actual mileage, production year, tire condition, engine condition, hydraulic system, and body condition should be confirmed for the specific unit before purchase.