Hyundai 220 Used Excavator R220LC-9S Earth-moving Digger for Construction and Rental Fleets

Build your earthmoving fleet around a used excavator that matches the work ahead. The Hyundai Robex R220LC-9S is a crawler machine for trenching, foundation digging, road earthworks, and material loading.

The supplied photos show Hyundai branding and 220LC-9S model markings. They also show steel tracks, an enclosed cab, a front cab guard, mirrors, and work lights.

Longmai Machinery supplies used construction machinery to contractors, equipment dealers, and overseas fleet buyers. We support machine selection, condition review, and export planning. Therefore, buyers can assess the selected unit before agreeing on an order.

Hyundai Design for Mixed Earthmoving Tasks

Hyundai’s CAPO control system coordinates engine and hydraulic output. It offers selectable work settings and diagnostic information, helping operators adapt the machine to different tasks.

For example, trenching requires controlled movement, while truck loading involves repeated digging and swing cycles. The right operating setting helps match the machine’s response to each job.

However, performance on a used unit depends on its present condition. Buyers should check the display, available modes, and hydraulic response during an operating test.

Reference Technical Specifications

The figures below follow Hyundai’s published R220LC-9S configuration with a Cummins engine, a 5.68 m boom, a 2.92 m arm, and 600 mm track shoes. They provide a comparison point rather than measured data for the pictured machine.

Track shoes, attachments, regional versions, and production changes can affect these values. Consequently, the quotation should confirm the serial number, installed engine, arm length, bucket, actual weight, and transport measurements.

Choose the Bucket Around the Material

Bucket size should match both the job and the material density. A wide bucket may suit loose soil, while narrow trench work calls for a different shape.

Before ordering, discuss:

• Soil, clay, sand, or gravel handling

• Required trench width and digging depth

• Truck size and loading conditions

• Bucket teeth and cutting-edge condition

• Pin dimensions and coupler compatibility

Additional pipework is visible along the pictured boom. Nevertheless, photos alone cannot confirm the circuit’s flow, pressure, or working condition. Breakers, grapples, and other hydraulic tools require separate compatibility checks.

Crawler Condition Matters to Fleet Costs

The steel tracks provide the machine’s working base. Their condition also affects future maintenance costs.

Start by checking the shoes, track links, rollers, idlers, and sprockets. Next, inspect the track adjusters and look for uneven wear or damaged components. A travel test should cover both directions and both speed ranges.

Surface rust is visible on the pictured tracks. Its appearance does not establish remaining service life. Therefore, close inspection and wear measurements offer a better basis for comparing units.

Enclosed Cab With Visible Front Guard

The photographed machine has a glazed cab and a guard across the lower front window. Side mirrors and roof-mounted work lights are also visible.

During inspection, check the door, glass, wiper, seat, controls, warning indicators, and lighting. In addition, confirm whether heating and air conditioning are installed and working.

Any guard certification should be checked from its identification records. The presence of a guard alone does not confirm a specific protection rating.

Applications for Contractors and Equipment Dealers

This used excavator can be considered for:

• Drainage and pipeline excavation

• Building foundations and basement work

• Road construction and embankment preparation

• Site clearing and general earthmoving

• Soil and aggregate loading

• Contractor fleet replacement

• Rental fleet expansion

Buyers comparing Hyundai machines can also review our used Hyundai HX220S crawler excavator. Compare the actual configuration and condition alongside the model specifications.

Review the Machine Through Operating Evidence

Request current photos, the serial plate, displayed hours, and available service records. Then ask for a cold-start video followed by a warm operating demonstration.

Useful checks include engine starting, exhaust, fluid leaks, boom movement, arm response, bucket operation, swing, and travel. Also inspect cylinder rods, hoses, pins, bushes, structural repairs, and final-drive areas.

Our used construction machinery buying guide explains further points to review. Buyer-appointed inspection and any required repairs can be discussed before purchase.

Export Support and Order Preparation

Longmai Machinery supports international buyers with inspection, export documentation, shipping coordination, spare-parts supply, and remote maintenance guidance.

Moreover, preparation work can be discussed according to the selected unit. Cleaning, servicing, attachment sourcing, and agreed repairs should be clearly listed in the order.

The transport plan should use confirmed dimensions and weight. Shipping method, loading arrangements, destination port, and delivery responsibilities should also appear in the quotation.

Request a Hyundai R220LC-9S Quote

Contact Longmai Machinery for availability, price, production year, recorded hours, inspection options, and shipping terms. Please provide your required quantity, destination port, main tasks, and preferred attachments.

Hyundai manufactures the R220LC-9S. Longmai Machinery is an independent supplier of used construction equipment.